Ottimo prodotto, facile montaggio e perfetto per la sua funzione. Spedizione rapida e puntuale. Consigliato!
Conçu par easysea
Rope Deflector - Protection de chaumard pour hublot
Prix Summer Sale
--:--:--
Ce prix court jusqu'au 31 août. Le 1er septembre, retour au prix catalogue.
Plus que 460 pièces en stock
En stock
Livraison estimée : lun 7 sept – mar 8 sept
Transaction sécurisée
Vendu par easysea®
Avant de commander
Comment puis-je l'installer ?
Nettoyez bien la surface, décollez le film adhésif 3M et appuyez le déflecteur sur le coin du hublot. Pas de perçage, pas d'outils.L'adhésif tient-il dans le temps ?
Oui : l'adhésif 3M est conçu pour les extérieurs marins et résiste à l'eau, au sel et aux UV. Il suffit de bien nettoyer la surface avant de l'appliquer.Qu'y a-t-il dans un pack ?
2 coins en silicone assortis : le kit complet pour un hublot.-
Garantie 3 ans
Couverture complète sur les défauts de matériau et de fabrication. Sans enregistrement. Avec easysea +care, vous ajoutez 3 ans, soit 6 au total. -
Retour sous 30 jours
Si cela ne convient pas, vous renvoyez, même monté. Remboursement intégral. -
Livraison suivie
Suivi sur chaque commande. Livraison offerte à partir de €399 .
- Le problème, résolu
- Pas de perçage, pas d'outils
- Un pack, un hublot
Vous ne gérez pas le point d'accroche : vous le supprimez
Le drap ne s'accroche plus plus
- 01
Le problème, résolu
Dans une manœuvre, chaque seconde compte : un cordage coincé sous la trappe signifie perdre le contrôle et risquer des dégâts. Le profil parabolique le laisse glisser.
- 02
Pas de perçage, pas d'outils
Support adhésif 3M : nettoyez la surface, décollez, appuyez. Installation terminée.
- 03
Un pack, un hublot
Deux coins en silicone marin de forme assortie couvrant les deux bords d'un hublot du pont avant. Résistant aux UV et au sel, pendant des années.
Du problème à la fluidité totale
01
Fin des catastrophes
Fini les écoutes coincées sous le coin du hublot lors des virements de bord et des empannages.
02
Une fluidité totale
La conception parabolique supprime physiquement le point d'accrochage : la ligne glisse sans hésitation sur la surface en silicone.
03
En forme de hublot
Le profil suit l'angle du hublot : discret, bas, au ras du pont.
04
Sous charge réelle
La feuille se charge et défile : le silicone la guide sans marquer le gelcoat.
Caractéristiques techniques
| Matériau | Silicone |
|---|---|
| Dureté | Shore 80A |
| Résistance | Rayons UV et eau salée |
| Dimensions (L x H) | 122 x 22 mm |
| Diamètre intérieur / extérieur | Ø 45 / 62 mm |
| Rayon max de l’angle | Ø max 45 mm |
| Poids | 25 g |
| SKU | ROD-101 |
Téléchargements
Fiche technique (PDF)Questions avant de commander
Comment puis-je l'installer ?
Nettoyez bien la surface, décollez le film adhésif 3M et appuyez le déflecteur sur le coin du hublot. Pas de perçage, pas d'outils.
L'adhésif tient-il dans le temps ?
Oui : l'adhésif 3M est conçu pour les extérieurs marins et résiste à l'eau, au sel et aux UV. Il suffit de bien nettoyer la surface avant de l'appliquer.
Qu'y a-t-il dans un pack ?
2 coins en silicone assortis : le kit complet pour un hublot.
Quand est-il expédié ?
En stock : les commandes sont traitées et expédiées sous 2 jours ouvrés.
Comment est-il couvert par la garantie ?
Une garantie de 3 ans contre les défauts de fabrication, plus une garantie de remboursement de 30 jours.
Customer Reviews
Overall rating: 4.5 / 5 from 36 reviews.
I have lewmar 30 and 60 hatches on my moody 336. Like many boats with these hatches, the deck slopes away from the hatch base and the non slip grp begins close to the hatch base. Two problems; 1.. the curve of the deflector is not compatible with the corner curve of this popular hatch and the slope means the deflector angles away from the hatch. 2.. the proximity of the non slip surface to the hatch means that the 3m vhb tape is unlikely to grip. For me this has been a waste of money . Also a significant delivery charge and some delivery delays and communication problems.
Rope Deflector – Porthole Fairlead Protection System
Store owner replied: Hi, we’re sorry the Rope Deflector wasn’t suitable for your setup. The product images on our website show a Lewmar Low Profile 44; in your case, the main issue seems to be the limited smooth surface available for the adhesive. Our customer care replies within 24 hours, while shipping costs are set by the couriers and we already cover part of them for non-EU deliveries. We’re launching a larger version and would be happy to send you one free of charge.
Hi, Problem solved ! Before we used to put an elastic around our hatch always afraid to forget to put it on. Stress gone ! Thx for the good tip ! We will be sure to spread the word :-) Michel S/Y TEQUILA
Rope Deflector – Porthole Fairlead Protection System
Store owner replied: Thank you Michel! So happy to hear the Rope Deflector solved the problem and took the stress away. Enjoy sailing on S/Y TEQUILA! ⛵️
Easy to install and efficient It could be white instead of black
product is ok, but the corners on my hatch have a much larger radius than the protectors, so I needed to bend the protectors further open. Despite cleaning the gelcoat with acetone and leaving 24 hours after sticking down, the glue has not stuck well. It's an expensive product to be semi-successful.
The angle on the moon is something less than 90 degrees so that when the points touch the hatch there is a gap between the center of the moon wedge and the hatch; however it works as advertised if not perfectly matched to the rounding of the hatch.
The Rope Deflectors worked great! Just sailed about 650 NM, and the jib sheets no longer snagged in the forward hatches of my sailboat. Well worth the money spent!
Really happy with the product and the delivery!
Works!
Works exactly as advertised. We used one each on the outboard corners of a opening cabin port light to deflect inhauler lines running across the cabin top.
Shipping was fast! The "lip" surface around my hatch is smaller and a different shape than the rope deflectors. So I had to "form" the deflectors to fit. Otherwise installation was straight forward and easy. Time will tell if they stay attached to the fiberglass because of the side force from my shaping them to fit. I have no doubt that they will prevent the sheets from jamming under the hatch cover.
Nice idea to solve a pain in the neck
Dispatched quickly but UPS then slowed down and "delivery by Friday " became the following Monday. I like the concept of the protectors, however we have a small hatch causing problems which needs a smaller radius. Also our deck doesn't have enough flat area for a proper fit adjacent to the hatch. I assume it works well with many vessels, but sadly not ours.
Seems like it will be a useful product. The curve of the deflectors doesn't match the corners of our hatches, but it fits well enough.
These work very well. We have used them to deflect trims on the forward hatch of two sailboats.
Rope Deflector – Porthole Fairlead Protection System
Store owner replied: Thank you. Great to hear they worked well on both boats and helped with the forward hatch setup. ⛵️
Required clearance around hinge side of hatch was more than I expected.
Remplis bien sa mission
…….
Easy to install and received the deflectors very quickly
Very easy. Order, ship, customs, arrival. Works great.
By far the most common hatch is the Lewmar Ocean Series. The rope deflector was designed around a hatch with a much larger corner radius. The deck on our boat was designed with only a small section of smooth surface around the hatch so the deflector did not fit well. I bent the deflector to match the radius of the hatch and to adhered it to the deck. It had to be bent quite a bit and I am concerned about long term ability of the adhesive to hold it into the distorted shape. Otherwise it looks like a great design. Perhaps providing more information on your site about the radius of the presenter and what is allowable bending to fit. Also offering an addition version with a smaller radius for ports and other hatch designs would be helpful.
For years I tried to solve the problem of the sheets getting stucked around tthe portholes ! I have tried several different solutions , but nothing has shown as efficient as yours
This rope deflectors is amazing, it solves issues what a great inventive and simple item thanks a lot
Seem to work so far.
works great.
costo eccessivo
Does the job, very neat.
Haven’t been able to install yet, will update after and we get to use them.
Works perfectly
Looks like it'll work great. Haven't installed them yet - the boat is still out of the water and the weather has been wet.
Works as described
Looks a useful product but not yet tested in earnest!
Looks great and the funktion is great
They fit fine, and will do the purpose, avoiding the geoan sheet to hook the hatch.
.
good product and fast shipping
Complétez votre équipement
- -22%
- -22%
easyseaOlli™ - Anneau à faible friction anti-choc en aluminium4.7Prix de venteA partir de €14,90 EUR Prix normal€19,00 EUR 
Souvent achetés ensemble
Rope Deflector - Protection de ...
€19,00
CET ARTICLE
Summer Sale · 15 → 31 août
Summer Sale.
Prix Summer Sale sur tout le catalogue. Remise déjà appliquée, aucun code à saisir. Le 1er septembre, retour au prix catalogue, automatiquement.
--
Jours
--
H
--
Min
--
Sec