Very easy to fit and closes the gap so that it would be difficult for the sheet to get stuck
Rope Deflector
Rope Deflector, Sistema de Proteção para Vigias e Guias de Cabo
Preço Summer Sale
--:--:--
Este preço é válido até 31 de agosto. A 1 de setembro volta ao preço de tabela.
Apenas 875 em stock
Preço Black MonthPreço Black WeekPreço Black FridayPreço Cyber Monday
Termina em --:--:--
-20%
Preços Black Month até 22 de novembro.Preços Black Week até 26 de novembro.Preços Black Friday até 29 de novembro.A 1 de dezembro tudo volta ao preço de tabela, automaticamente.
Apenas 875 em stock
Não se gere o ponto de encravamento: elimina-se
- O problema, resolvido
- Sem furar, sem ferramentas
- Uma embalagem, uma vigia
De quantos precisa?
Em stock
Entrega estimada: Sex 6 nov – Seg 9 nov
Transação segura
Vendido por easysea®
Before you order
Como se instala?
Limpe bem a superfície, retire a película do adesivo 3M e pressione o deflector no canto da vigia. Sem furar, sem ferramentas.O adesivo mantém-se ao longo do tempo?
Sim: o adesivo 3M foi concebido para exteriores marítimos e resiste à água, ao sal e aos UV. Basta limpar bem a superfície antes de aplicar.O que inclui a embalagem?
2 cantos em silicone emparelhados: o kit completo para uma vigia.-
3-year warranty
Full cover on material and manufacturing defects. No registration needed. With easysea +care you add 3 more years, 6 in total. -
30-day returns
If it is not right you send it back, even fitted. Full refund. -
Tracked shipping
Tracking on every order. Free shipping over €99 .
Rope Deflector, Sistema de Proteção para Vigias e Guias de Cabo
Preço promocional€15,20 EUR
Preço normal€19,00 EUR
A escota nunca mais encrava
- 01
O problema, resolvido
Numa manobra cada segundo conta: um cabo preso sob a escotilha significa perder o controlo e arriscar danos. O perfil parabólico deixa-o deslizar.
- 02
Sem furar, sem ferramentas
Base adesiva 3M: limpe a superfície, retire a película, pressione. Instalação concluída.
- 03
Uma embalagem, uma vigia
Dois cantos em silicone marítimo moldados e emparelhados, que cobrem as duas arestas de uma vigia de proa. Resistentes aos UV e ao sal, durante anos.
Do problema à fluidez total
01
Fim dos desastres
Adeus às escotas presas sob o canto da vigia nas viragens por davante e de popa.
02
Fluidez total
O design parabólico elimina fisicamente o ponto de encravamento: o cabo desliza sobre a superfície de silicone sem hesitação.
03
Moldado para vigias
O perfil acompanha o canto da vigia: discreto, baixo, alinhado com o convés.
04
Sob carga real
A escota carrega e corre: o silicone guia-a sem marcar o gelcoat.
Especificações técnicas
| Material da borracha | Silicone |
|---|---|
| Dureza | Shore 80A |
| Resistência | Raios UV e água salgada |
| Dimensões (C x A) | 122 x 22 mm |
| Diâmetro interior / exterior | Ø 45 / 62 mm |
| Raio máximo do canto | Ø max 45 mm |
| Peso | 25 g |
| Temperatura de aplicação | 10-38 °C (ideal 20-38 °C) |
| SKU | ROD-101 |
Downloads
Ficha técnica (PDF)Concebidos por nós, testados no mar
- 3 anos de garantianos produtos easysea
- Devolução em 30 diasmudaste de ideias? Sem problema
- Envio com seguimentoem toda a Europa, Reino Unido e EUA
- Nomeados para os DAMEo prémio de design náutico do METSTRADE
Customer Reviews
Overall rating: 4.4 / 5 from 50 reviews.
Scollata in punta
Ottimo prodotto, facile montaggio e perfetto per la sua funzione. Spedizione rapida e puntuale. Consigliato!
I have lewmar 30 and 60 hatches on my moody 336. Like many boats with these hatches, the deck slopes away from the hatch base and the non slip grp begins close to the hatch base. Two problems; 1.. the curve of the deflector is not compatible with the corner curve of this popular hatch and the slope means the deflector angles away from the hatch. 2.. the proximity of the non slip surface to the hatch means that the 3m vhb tape is unlikely to grip. For me this has been a waste of money . Also a significant delivery charge and some delivery delays and communication problems.
Rope Deflector – Porthole Fairlead Protection System
Store owner replied: Hi, we’re sorry the Rope Deflector wasn’t suitable for your setup. The product images on our website show a Lewmar Low Profile 44; in your case, the main issue seems to be the limited smooth surface available for the adhesive. Our customer care replies within 24 hours, while shipping costs are set by the couriers and we already cover part of them for non-EU deliveries. We’re launching a larger version and would be happy to send you one free of charge.
Hi, Problem solved ! Before we used to put an elastic around our hatch always afraid to forget to put it on. Stress gone ! Thx for the good tip ! We will be sure to spread the word :-) Michel S/Y TEQUILA
Rope Deflector – Porthole Fairlead Protection System
Store owner replied: Thank you Michel! So happy to hear the Rope Deflector solved the problem and took the stress away. Enjoy sailing on S/Y TEQUILA! ⛵️
Easy to install and efficient It could be white instead of black
Muy práctico
alles bestens
Molto seria
Ich habe noch keine Langzeiterfahrung, tut mir leid. Ich hofe dass der Kleber hält. Das ist ein rauhes Umfeld das Vordeck.
Parfait
Vor einer Woche installiert. Bis jetzt scheint es zu funktionieren.
Parfait. A voir si le scotch tient dans le temps.
il ne colle pas sur le teck.
Rope Deflector – Porthole Fairlead Protection System
Store owner replied: Bonjour, et merci pour votre retour. C'est exact : le Rope Deflector se colle uniquement sur une surface lisse et plane en gelcoat, car l'adhésif 3M a besoin d'un contact continu que le grain du teck ne permet pas. C'est précisé sur la fiche produit. Si vous ne l'avez pas encore posé et que la livraison date de moins de 30 jours, le retour est gratuit : écrivez-nous à support@easysea.org. Anna // customer care
Great idea, always wondered why they designed the hatches to always catch the sheets. Now this is not an issue any more.
Worked well.
We’re actually waiting for the weather to warm up for us to install it so I had to score 4 out of five hoping it’s gonna work really well! We feel it’s a little bit too chilly right now. Is there an actual temperature that it’s appropriate to put on?
Rope Deflector – Porthole Fairlead Protection System
Store owner replied: Yes, temperature does make a difference during installation. For 3M double-sided tapes, including VHB, the ideal application temperature is between 20°C and 38°C. We would recommend avoiding installation below around 10–15°C, as the adhesive can become too stiff to bond properly to the surface. After application, it’s best to allow around 72 hours for the adhesive to reach its full bond strength. Once fully bonded, the tape can withstand a much wider temperature range, approximately from -40°C to +70°C.
ok
product is ok, but the corners on my hatch have a much larger radius than the protectors, so I needed to bend the protectors further open. Despite cleaning the gelcoat with acetone and leaving 24 hours after sticking down, the glue has not stuck well. It's an expensive product to be semi-successful.
The angle on the moon is something less than 90 degrees so that when the points touch the hatch there is a gap between the center of the moon wedge and the hatch; however it works as advertised if not perfectly matched to the rounding of the hatch.
The Rope Deflectors worked great! Just sailed about 650 NM, and the jib sheets no longer snagged in the forward hatches of my sailboat. Well worth the money spent!
Really happy with the product and the delivery!
Works!
Works exactly as advertised. We used one each on the outboard corners of a opening cabin port light to deflect inhauler lines running across the cabin top.
Shipping was fast! The "lip" surface around my hatch is smaller and a different shape than the rope deflectors. So I had to "form" the deflectors to fit. Otherwise installation was straight forward and easy. Time will tell if they stay attached to the fiberglass because of the side force from my shaping them to fit. I have no doubt that they will prevent the sheets from jamming under the hatch cover.
Nice idea to solve a pain in the neck
Dispatched quickly but UPS then slowed down and "delivery by Friday " became the following Monday. I like the concept of the protectors, however we have a small hatch causing problems which needs a smaller radius. Also our deck doesn't have enough flat area for a proper fit adjacent to the hatch. I assume it works well with many vessels, but sadly not ours.
Seems like it will be a useful product. The curve of the deflectors doesn't match the corners of our hatches, but it fits well enough.
These work very well. We have used them to deflect trims on the forward hatch of two sailboats.
Rope Deflector – Porthole Fairlead Protection System
Store owner replied: Thank you. Great to hear they worked well on both boats and helped with the forward hatch setup. ⛵️
Required clearance around hinge side of hatch was more than I expected.
Remplis bien sa mission
…….
Easy to install and received the deflectors very quickly
Very easy. Order, ship, customs, arrival. Works great.
By far the most common hatch is the Lewmar Ocean Series. The rope deflector was designed around a hatch with a much larger corner radius. The deck on our boat was designed with only a small section of smooth surface around the hatch so the deflector did not fit well. I bent the deflector to match the radius of the hatch and to adhered it to the deck. It had to be bent quite a bit and I am concerned about long term ability of the adhesive to hold it into the distorted shape. Otherwise it looks like a great design. Perhaps providing more information on your site about the radius of the presenter and what is allowable bending to fit. Also offering an addition version with a smaller radius for ports and other hatch designs would be helpful.
For years I tried to solve the problem of the sheets getting stucked around tthe portholes ! I have tried several different solutions , but nothing has shown as efficient as yours
This rope deflectors is amazing, it solves issues what a great inventive and simple item thanks a lot
Seem to work so far.
works great.
costo eccessivo
Dúvidas antes de encomendar
Como se instala?
Limpe bem a superfície, retire a película do adesivo 3M e pressione o deflector no canto da vigia. Sem furar, sem ferramentas.
A que temperatura deve ser aplicado?
A fita 3M VHB tem melhor desempenho entre 20 e 38 °C. Mínimo recomendado: 10-15 °C. Abaixo de 10 °C o adesivo fica demasiado rígido, não molha bem a superfície e a aderência fica comprometida. Evite também aplicar acima de 38 °C.
O adesivo mantém-se ao longo do tempo?
Sim: o adesivo 3M foi concebido para exteriores marítimos e resiste à água, ao sal e aos UV. Basta limpar bem a superfície antes de aplicar.
O que inclui a embalagem?
2 cantos em silicone emparelhados: o kit completo para uma vigia.
Quando é expedido?
Está em stock: as encomendas são processadas e expedidas em 2 dias úteis.
Como funciona a garantia?
Garantia de 3 anos contra defeitos de fabrico, mais garantia de devolução do dinheiro em 30 dias.
Complete o seu equipamento
- -20%-20%
easyseaFlipper™ - Manivela de winch dobrável4,8(435)Preço promocional€156,00 EUR Preço normal€195,00 EUR - -5%-5%
easyseaOlli™ - Anel de baixo atrito em alumínio Anti Shock4,7(103)Preço promocionalDesde €14,15 EUR Preço normal€14,90 EUR - -20%-20%
easyseaOlli™ - Patesca Snatch e Anti-shock4,8(86)Preço promocionalDesde €92,00 EUR Preço normal€115,00 EUR - -20%-20%
easyseaWay2 - O passadiço insuflável reversível4,5(31)Preço promocional€319,20 EUR Preço normal€399,00 EUR
Comprados juntos
Rope Deflector, Sistema de Prot...
€15,20
ESTE ARTIGO
Summer Sale · 15 → 31 de agosto
Summer Sale.
Preços Summer Sale em todo o catálogo. Desconto já aplicado, sem código a introduzir. A 1 de setembro tudo regressa ao preço de tabela, automaticamente.
--
Dias
--
Horas
--
Min
--
Seg
Black MonthBlack WeekBlack FridayCyber Monday · 1 → 22 de novembro23 → 26 de novembro27 → 29 de novembro30 de novembro
BlackBlackBlackCyber Month.Week.Friday.Monday.
Desconto já aplicado, sem código a introduzir. Preços Black Month até 22 de novembro.Preços Black Week até 26 de novembro.Preços Black Friday até 29 de novembro.A 1 de dezembro tudo volta ao preço de tabela, automaticamente.
--
Dias
--
Horas
--
Min
--
Seg