Olli™ flex Conversion Kit L
One kit turns your Olli Flex into a deck-mounted, double or triple setup, buy once, build any configuration.
Launching soon. Contact us for availability and trade pricing.
Everything you need, in one box
Each Conversion Kit ships with the deck-mount and joining hardware sized for your block: long bolts, self-locking nuts, washers, a bushing and an AISI 316 omega shackle. Combine identical Olli Flex blocks into a double or triple purchase, or bolt one flat to the deck.
- Single on deck, double or triple
- Assembles with a few common hand tools (not included)
- One kit covers every configuration for its size and load class
One kit, every setup
The same kit reconfigures your Olli Flex with a few common hand tools (listed below, not included). Build the purchase you need, then change it when the job changes.
Single, on deck
Bolt one Olli Flex flat to the deck for a low-profile turning point, mounted with the supplied hardware.
Double purchase
Join two identical blocks into a double for 2:1 power, assembled in minutes without unreeving.
Triple purchase
Stack a third block for maximum purchase, the joining hardware and shackle are already in the box.
- 5 mm hex key
- 6 mm hex key
- 10 mm socket wrench
- 13 mm socket wrench
Made for Olli Flex 60 ST
This kit is matched to the Olli Flex 60 ST block, same size and load class. Use it to mount the block on deck, or to build double and triple purchases from identical blocks (sold separately).
View Olli Flex 60 ST · €95.00About the kit
The Conversion Kit L turns your Olli Flex 60 ST into a deck-mounted or multi-sheave setup. Buy one kit and build single-on-deck, double or triple purchase from identical blocks.
Assembly takes a few common hand tools (hex keys and socket wrenches, not included, listed below). One kit per size and load class, the same kit covers deck mount, double and triple.
Key features
- Double & triple: join two or three identical Olli Flex blocks
- Deck mount: bolt the block flat to the deck
- Quick assembly: a few common hand tools, in minutes
- Marine-grade hardware: AISI 316 omega shackle sized for your block
In the box
- 1× long bolt M6 · 50 mm
- 1× long bolt M6 · 80 mm
- 1× long bolt M8 · 55 mm
- 1× long bolt M8 · 85 mm
- 1× omega shackle Ø20 mm · AISI 316
- 1× bushing Ø10
- 2× spacer sleeve
- 2× self-locking nut M6
- 1× self-locking nut M10
- 2× washer Ø12.5 (OD)
- 2× washer Ø20 (OD)
- 1× distance washer Ø18 (OD)
- 1× distance washer Ø30 (OD)
Specifications
EASYSEA COMMUNITY
Trete der Community bei
Vernetze dich mit Tausenden von Bootsfahrern, die easysea gewählt haben. Teile Konfigurationen, hole dir Hilfe und entdecke, was andere segeln.
Community beitretenB2B PORTAL
Haben Sie ein Geschäft?
Greifen Sie auf das easysea B2B-Portal mit Händlerpreisen, technischen Ressourcen und Support für Fachhändler zu.
Frequently asked questions
Do I need the Conversion Kit?
Only if you want to mount the block on deck or combine blocks into double or triple. A single hanging block works on its own from its shackle.
How many kits for a double or triple?
Just one. The same kit carries the deck-mount and joining hardware for both double and triple, you buy the extra blocks separately.
Does it fit any Olli Flex?
Each kit is matched to one size and load class. Use the kit that matches your block (shown above).
Any tools needed?
Yes: a few common hand tools (hex keys and socket wrenches), listed on this page. Important: never tighten the pins solid, the bodies must stay free to rotate so the block keeps its openable function.
